Publicidad
Idiomas disponibles
Idiomas disponibles
Battery level display
The battery level display 2 indicates the charge level using 2
coloured LEDs .
Green LED
The battery is charged .
Red LED
The battery is flat . Recharge it .
Operation
Never use the appliance for purposes other than those for which it
was designed and only with original parts/accessories . Using
attachments or accessory tools other than those recommended in the
operating instructions can lead to a risk of injury .
Switching on and off
Switching on
♦
Press and hold the ON/OFF switch 1 .
Switching off
♦
Let go of the ON/OFF switch 1 .
Setting the penetration depth of the engraving
Use the +/– speed control buttons 4 to set the penetration depth
of the engraving . A low setting is usually sufficient for the most
common applications .
♦
Press the + speed control button 4 to increase the penetration
depth .
♦
Press the – speed control button 4 to decrease the penetration
depth .
PAGG 4 A1
GB │ MT
│
63
■
Publicidad
