Publicidad
Idiomas disponibles
Idiomas disponibles
HOW TO LIGHT THE SURFACE BURNERS
1.
Push in and turn the control knob counterclockwise
to the light position ( ). All surface burners will click
but only the burner with control knob turned to
LITE will produce a flame.
2.
After the burner ignites, turn the control knob to
the desired flame size.
NOTE: ALWAYS position cooking cookware on the
burner grate before lighting the burner.
CAUTION: The flame SHOULD NOT extend beyond the
sides or the pot or pan.
IN CASE OF POWER FAILURE
WARNING: Use extreme caution when lighting burners this way.
1.
Hold a lit match to the desired burner head.
2.
Push and turn the control knob to the " " position.
3.
Once burner ignites, adjust flame to the desired size.
OFF
MAX
12
Figure 6
MIN
Figure 7
Publicidad
