Descargar Imprimir esta página

Grundig CDP 180 Manual Del Usuario página 19

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 51
Inserting a CD
• Open the lid by pressing the OPEN button.
• Insert an audio CD, printed side up.
• Push gently on the CD center so that it
fits onto the hub.
• In addition to standard 12 cm CD's,
you can also play 8 cm CD singles
without an adapter.
• Close the lid by pushing it on its left-hand side.
• Press PLAY·PAUSE 2; to start playback.
– The CD-player scans the contents list of the CD.
The total playing time and number of
tracks appear on the display.
– After that, the display shows the
current track number and its elapsed
playing time.
• Adjust the sound using the VOLUME
and UBS controls.
– The position of these controls does not affect the output
signal of the LINE OUT socket.
• For brief interruptions, press PLAY·PAUSE 2;.
– The playing time indication flashes.
• To resume playback, press
PLAY·PAUSE 2; again.
PLAYING A CD
• To stop playback, press STOP 9.
The total playing time and number of
tracks appear on the display.
• If you press the STOP 9 button
again, you will switch off the set.
– If no button is pressed for 30 seconds, the set will switch off
automatically.
Selecting another track during playback
• Press SKIP·SEARCH S or T until the required track
number appears in the display.
– The selected track begins to play.
Searching for a passage during playback
• Hold down the SKIP·SEARCH S or T button during
playback to find a particular passage in backward or
forward direction.
CD play continues at a low volume.
• Release the button when you have reached the desired
passage.
Removing the CD:
• To take out the CD, open the lid by
pressing the OPEN button.
• Hold the CD by its edge and press the
hub gently.
• Open the CD lid only if the CD player
is in position STOP.
GB
19

Publicidad

loading