Publicidad
Idiomas disponibles
Idiomas disponibles
Installation
English
6. Place the freezer on a flat surface and remove part 3. Then remove screw 4 and remove parts 1 and 2.
7. Screw in the lower hinge, replace it in the hole next to the lower hinge and then screw it in with the
washer.
8. Go back to step 6, replace part 1 on the left and part 2 on the right. Then fasten them with screw 4.
Finally mount part 3.
9. Swap the wires from the left and right sockets on the freezer frame.
10. Move the door to the appropriate position. Fit part 1 (included in the plastic bag) and the door. Insert
the connecting cable 2 into the socket on the door from right to left. Then fasten parts 1 and 2 with screw
3. Hold the door by hand during assembly.
39
infiniton.es
Publicidad
