Allen + Roth LWFP58-7 Instrucciones De Montaje página 3

HARDWARE CONTENTS (shown not actual size)
AA BB
M4 x 10 mm Screw Cam Lock
Qty. 10 Qty. 44
EE FF
M3.5 x 12 mm
M3.5 x 15 mm
Screw
Washer Head Screw
Qty. 4
Qty. 32
II JJ
Straight Bracket Shelf Pin
Qty. 2 Qty. 16
MM NN
L-shaped Bracket Glue
Qty. 2 Qty. 2
QQ RR
Tipping Restraint
Touch-up Pen
Hardware Kit
Qty. 1
Qty. 2
CC DD
Cam Bolt M8 x 30 mm Wood Dowel
Qty. 44 Qty. 41
GG HH
M4 x 50 mm M3.5 x 13 mm
Screw Pan Head Screw
Qty. 6 Qty. 8
KK LL
Cam Lock Cover Rubber Bumper
Qty. 12 Qty. 4+1 extra
OO PP
Handle Bolt Acrylic Stopper
Qty. 4 Qty. 1
Extra Hardware
4
Lowes.com/allenandroth
SAFETY INFORMATION
Please read and understand this entire manual before attempting to assemble, operate or install the
product.
• Do not allow children to climb or play in or around this product.
• Use this unit for its intended purpose only. Do not use shelves as step ladder.
• To avoid damage, assemble the product on a sturdy, level and protective surface.
• Two people should work together to assemble the unit.
• Make sure all bolts/screws are tightly fastened before the unit is used.
• Check bolts/screws periodically and tighten them if necessary.
• Do not push furniture, especially on carpeted floor. Have someone help you lift the item and
place it in its new location. Remove any shelves before moving.
Fits up to most 165.1 cm / 65 in. diagonal flat panel TVs
Maximum load 36.28 kg / 80 lb
Place TV behind the stopper
WARNING
This unit is not intended for use with CRT TVs. Use only with flat panel TVs and audio/video equipment
meeting recommended size and weight limits. Never use with larger/heavier than recommended flat
panel TVs or equipment. To avoid instability, place flat panel TV in the center of the unit; the base
of the television must be able to rest on the supporting surface of the unit without over-hanging the
edges. Improperly positioned flat panel TVs, or flat panel TVs or other equipment that exceed
recommended size and weight limits could fall off or break the unit, causing possible serious injury.
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package
contents list and hardware contents list. If any part is missing or damaged, do not attempt to
assemble the product.
Estimated Assembly Time: 100 minutes
Tools Required for Assembly (not included): Phillips screwdriver, power drill, 1/8 in. drill bit,
marking pencil and hammer.
Maximum load 22.7 kg / 50 lb
5
Lowes.com/allenandroth