Allen + Roth LWFP58-7 Instrucciones De Montaje página 5

ASSEMBLY INSTRUCTIONS
7. Glue one wood dowel (DD) into the designated hole on the bottom
middle stretcher (R) and attached it to the front skirting (O) by
engaging one cam lock (BB).
Hardware Used
BB Cam Lock
DD
Wood Dowel
NN Glue
8a. Glue two wood dowels (DD) to the end side holes on both side
skirtings (P and Q) and attach them to the front skirting (O) by
engaging two cam locks (BB).
8b. Insert two 50 mm screws (GG) through the rear skirting (N) and
securely screw into the bottom middle stretcher (R).
Hardware Used
BB Cam Lock
DD
Wood Dowel
GG
M4 x 50 mm screw
NN
Glue
9. Glue the wood dowels (DD) into the inner holes on the skirting
boards (N, O, P and Q) and attach them to the bottom panel (M)
by engaging 11 cam locks (BB).
Hardware Used
BB
Cam Lock
DD
Wood Dowel
NN
Glue
7
O
x 1
x 1
DD
R
BB
x 1
8
P
x 2
N R
x 2
x 2
x 1 GG
9
DD
P
N
x 11
x 8
M
x 1
8
Lowes.com/allenandroth
ASSEMBLY INSTRUCTIONS
10a. Ask for assistance to turn the base upright.
10b. Securely screw four cam bolts (CC) into the designated small
holes on the bottom panel (M). Fully tighten with a Phillips
screwdriver.
Hardware Used
Cam Bolt
CC
11a. Glue four wood dowels (DD) into the bottom inner holes on the
DD
partition panels (T and U).
11b. Align the large holes on the bottom panel (M) with the in-
serted dowels on the partition panels (T and U) and press
them together.
BB
11c. Insert four 50 mm screws (GG) through the mounting holes
on the bottom panel (M) and securely screw into the partition
O
panels (T and U).
Hardware Used
DD Wood Dowel
Q
GG M4 x 50 mm screw
NN
Glue
12a. Glue four wood dowels (DD) into the bottom inner holes on the
side panels (S) as shown.
12b. Orient and attach the side panels (S) to the bottom panel (M)
by engaging four cam locks (BB).
Hardware Used
BB
O
BB
Cam Lock
DD
Wood Dowel
Q
NN
Glue
10
CC
x 4
M
11
U
T
x 4
DD
x 4
x 1
GG
12
The hinge bases face
inward and are located
at front of the unit.
DD
BB
S
x 4
x 4
S
x 1
9
Lowes.com/allenandroth
Floor
leveler
DD
M
GG
M