Publicidad
Idiomas disponibles
Idiomas disponibles
J
ASSEMBLY INSTRUCTIONS
1a. Unpack the unit and confirm that you have all the hardware and
required parts. Assemble the unit on a carpeted floor or the
empty carton to avoid any scratch.
1b. Securely screw the cam bolts (CC) into the designated small holes
on the top panel (K), middle crossbar (X) and partition panels (T and
U). Fully tighten with a Phillips screwdriver.
Hardware Used
Cam Bolt
CC
2a. Glue two wood dowels (DD) into the inner holes of media shelf (L).
2b. Orient and attach the middle crossbar (X) to the media shelf (L) by
engaging 3 cam locks (BB).
Hardware Used
BB
Cam Lock
DD
Wood Dowel
NN
Glue
3a. Glue two wood dowels (DD) into the inner holes of each middle trim
(Z).
3b. Attach the middle trims (Z) to the partition panels (T and U) with 2
cam locks (BB) respectively.
Hardware Used
BB
Cam Lock
DD
Wood Dowel
NN
Glue
1
X
x 24
T
2
X
x 3
DD
x 2
x 1
The outer edges are
flush with each other
3
DD
T
x 4
x 4
BB
Z
x 1
6
Lowes.com/allenandroth
ASSEMBLY INSTRUCTIONS
4a. Glue four wood dowels (DD) into the inner holes of the media shelf
(L) at both ends.
4b. Orient and attach the top front molding (W) and media shelf (L) between
the partition panels (T and U) by engaging 6 cam locks (BB).
K
Hardware Used
CC
Cam Lock
BB
DD
Wood Dowel
NN
Glue
U
5. Securely screw the cam bolts (CC) into the designated small holes
on the bottom panel (M) and skirting boards (O, P and Q). Fully
tighten with a Phillips screwdriver.
BB
Hardware Used
CC
Cam Bolt
L
6. Glue two wood dowels (DD) into the designated holes of rear skirting
(N) at both ends and attach it between the side skirtings (P and Q) by
engaging 2 cam locks (BB).
Hardware Used
DD
BB
Cam Lock
U
DD
Wood Dowel
BB
Z
NN
Glue
4
The cam locks
face inward
W
L
x 6
DD
x 4
T
x 1
5
M
x 16
P
O
6
N
x 2
DD
The cam locks
x 2
BB
Q
x 1
7
Lowes.com/allenandroth
U
BB
CC
Q
DD
P
BB
face inward
Publicidad
