Descargar Imprimir esta página

Andis TC-2 Instrucciones De Uso Y Cuidado página 5

Ocultar thumbs Ver también para TC-2:

Publicidad

Idiomas disponibles

Idiomas disponibles

OPERATING INSTRUCTIONS
Plug cord into electrical outlet, operate at 100-240V, 50/60 Hz cycle AC electrical
current or as noted on the unit. To start clipper/trimmer move switch button to "On"
(–) position; to stop, move switch button back to original (O) position. After using
your Andis clipper/trimmer, re-wrap cord loosely and store in a safe place. For care of
the cord, untwist it while in use.
DUAL VOLTAGE
Confirm the voltage available at each overseas location before using the appliance.
For connection to a 240V supply, use an attachment plug adapter of the proper
configuration for the power supply receptacle.
USING THE ATTACHMENT COMBS
You can set the blades for a longer cut by using any of the attachment combs made
for your Andis clipper/trimmer. The combs mount easily; simply slip the cutter blade
teeth into comb and snap the comb down (Figures A & B). To remove, simply snap
off. These attachment combs guide hair into the blades and give you precise control
of hair lengths. The length of trim is indicated on the attachment comb. Use the chart
to find the approximate lengths of cut. Different blade angles in relation to the skin,
thickness and texture of the hair will vary the cutting length.
USER MAINTENANCE
The internal mechanism of your clipper/trimmer has been permanently lubricated
at the factory. Other than the recommended maintenance described in this manual,
no other maintenance should be performed, except by Andis Company or an Andis
authorized service station. To find an Andis authorized service station near
you log on to andis.com or contact our customer service department at
1-800-558-9441.
BLADE TEMPERATURE
Due to the high speed nature of Andis clippers, please check for blade heat often,
especially on close cutting blades. If blades are too hot, dip the blades only into
Andis Blade Care Plus or apply Andis Cool Care Plus and then Andis Clipper Oil.
If you have a detachable blade unit, you can change your blade in order to maintain
a comfortable temperature.
5

Publicidad

loading