Descargar Imprimir esta página

Domo DO7253S Manual De Instrucciones página 36

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 38
DO7253S
2
MAINTENANCE
Check the hose, dust bag and filter regularly. Empty the hose when it is clogged,
replace the dust bag when it is full and clean the filter when it is dirty.
Disposable dust bags and filters
The dust bag and the motor filter play a very important roll in the efficiency of the
vacuum cleaner. the purpose of the dust bag is to capture dirt, but at the same time
the filter needs to be porous enough to allow air to pass through. If the bag or motor
filter get clogged, no air can pass through the cleaner and no cleaning can take place
regardless of how powerful the unit is.
To keep the cleaner operating at maximum efficiency, change the dust bag
frequently and clean the filter when needed. Some fine particles can restrict the
air flow very quickly and will decrease the performance even before the bag appears
to be full. For that reason, the bag and filter may need to be changed more often
when vacuuming carpet fresheners or cleaners, powder, plaster dust or similar fine
substances.
Replacing the dust bag and cleaning the motor filter
be sure to turn off and unplug the vacuum cleaner before replacing the dust bag or
cleaning the filter. Never vacuum without the dust bag or filter in place.
1. turn off and unplug the vacuum cleaner.
2.
remove the hose from the hose connection and open
the dust bag compartment by pushing the handle
upwards and lifting the lid.
3.
grasp the dust bag frame and pull the frame with the
dust bag out of the dust bag compartment.
4.
remove the dust bag from the frame and slide in a new
dust bag (3,5l).
5.
Remove the motor filter by pressing it down a bit and
clean it when it is dirty by rinsing it under warm water.
Let the filter air dry completely before installing it
3
6
36
2
3

Publicidad

loading