Publicidad
Idiomas disponibles
Idiomas disponibles
d) Fluids may leak out of rechargeable battery
units if they are misused. If this happens,
avoid contact with the fluid. If contact occurs,
flush the affected area with water. Seek addi-
tional medical help if any of the fluid gets into
your eyes. Escaping battery fluid may cause
skin irritation or burns.
e) Do not use a damaged or modified battery.
Damaged or modified batteries may behave
unexpectedly and cause fires, explosions or
pose a risk of injury.
f) Do not expose a battery to fire or excessively
high temperatures. Fire or temperatures in excess
of 130°C (265°F) can cause an explosion.
g) Follow all instructions regarding charging
and never charge the battery or the cordless
tool outside of the temperature range given in
the operating instructions. Incorrect charging
or charging outside of the permissible tempera-
ture range can destroy the battery and increase
the risk of fire.
CAUTION! RISK OF EXPLOSION!
Never charge non-rechargeable
batteries!
able battery from heat, for example from
continuous exposure to sunlight, fire, water
and moisture. There is a risk of explosion.
6. Service
a) Have your power tool serviced by a qualified
repair person using only identical replace-
ment parts. This will ensure that the safety of
the power tool is maintained.
b) Never try to repair damaged batteries. Main-
tenance of batteries should only be carried out
by the manufacturer or an approved customer
service centre.
6
GB │ IE
■
│
Protect the recharge-
Appliance-specific safety instructions
for impact wrenches
■
Wear ear muffs when impact screwing. Expo-
sure to loud noise can lead to hearing loss.
■
Secure the workpiece. A workpiece securely
held by a clamping device or vice is much safer
than one held in your hand.
■
Hold the power tool firmly. High torques can
occur for brief periods while tightening and
loosening screws.
■
Wait until the power tool has come to a stand-
still before putting it down. The tool could
catch in something and thus lead to loss of
control of the power tool.
■
Hold the power tool by the insulated gripping
surfaces when performing an operation
where a screw may hit hidden power lines. If
a screw comes into contact with a live wire, this
may make exposed metal parts of the power
tool live and could give the operator an electric
shock.
Original accessories/auxiliary
equipment
■
Use only the accessories and additional equip-
ment that are specified in the operating instruc-
tions and are compatible with the appliance.
WARNING!
■
Do not use any accessories that are not
recommended by PARKSIDE. Doing so could
lead to an electric shock and/or fire.
ATTENTION! Hot surface.
There is a risk of burns.
PASSP 20-Li A3
Publicidad
