UPPAbaby G-LITE 0182 Manual Del Usuario página 4

STROLLER ASSEMBLY
ATTACHING THE FRONT WHEELS
Attaching Front Wheels: Slide front wheels onto
frame until an audible "click" is heard.
OPENING THE STROLLER
STEP 1: Release the latch lock on the left side of the
frame and unfold the stroller.
4
All manuals and user guides at all-guides.com
Removing Front Wheels: Push plastic lever on
underside of wheel post and slide wheel off
frame .
STEP 2: Rest stroller on back wheels and push down
pedals (with your right foot) on the back of stroller
while pulling both handles up towards you.
NOTE: Make sure each lock "clicks" to indicate that the
frame is fully open.
STROLLER ASSEMBLY
ATTACHING THE CUP HOLDER
SETTING/RELEASING THE BRAKE
To Set Brake: Press down foot pedals to lock.
To Release Break: Lift up on foot pedals.
NOTE: The G-LITE utilizes independent brakes. Make
sure both brakes are engaged/disengaged before use.
ATTACHING THE CANOPY
STEP 1: Line up canopy attachment, from inside of
frame, with short post. Rotate over frame to snap on.
Snap cup holder into place using attachment pin
located below handle.
LOCKING/UNLOCKING
FRONT SWIVEL WHEEL
To Lock: Lift up on lever until an audible "click"
is heard . This will fix the wheel in place.
To Unlock: Push down on lever to return to swivel
wheel .
STEP 2: Attach Velcro on canopy fabric to seat back.
5