GE 22 Serie Manual De Uso Y Cuidado página 35

ABOUT THE TEMPERATURE CONTROLS
To run your refrigerator:
• Connect the power supply�
• Select the temperature control�
• To adjust the temperature of your refrigerator in
accordance with the amount of your food and
climate of your city� The temperature controls are
preset in the factory at 3˚C (37˚F) for the refrigerator
compartment and -18˚C (0˚F) for the freezer
compartment�
Allow 24 hours for the temperature to stabilize to the
preset recommended settings.
Refrigerator temperatures can be adjusted between 1˚C
and 7˚C (34˚F to 44˚F), and the freezer temperatures can
be adjusted between -21˚C and -14˚C (-6˚F to 6˚F).
Note: The refrigerator is shipped with protective film
covering the temperature controls. If this film was not
removed during installation, remove it now.
To change the Refrigerator room temperature:
To adjust the Actual Temp Control temperature, first
press the Freezer (Temperature) or Refrigerator
(Temperature) button� Then press WARMER (+) or
COLDER (-) to increase or decrease temperature to the
desired setting� Once the desired temperature has been
set, the temperature display will return to the actual
refrigerator and freezer temperatures after 5 seconds�
Several adjustments may be required� Each time you
adjust the control, allow 24 hours for the refrigerator to
reach the temperature you have set� The temperature
controls can display both the SET temperature as
well as the actual temperature in the refrigerator and
freezer� The actual temperature may vary slightly
from the temperature based on usage and operating
environment�
Turning the cooling system off
Setting either or both controls to 0 stops cooling in both
the freezer and refrigerator compartments, but does not
shut off electrical power to the refrigerator.
When the unit is turned back on, it will take up to 24
hours to stabilize�
Models with Glass touch
This control is touch sensitive, you do not need to push
the button but touch to activate the function�
To adjust the temperature use SET TEMP to activate the
function, touch the button the necessary times to set
either refrigerator or freezer temperature, then use (+) or
(-) buttons to increase o decrease the temperature value�
To see the refrigerator actual temperature touch the SET
TEMP button during 5 seconds�
Note: Allow 24 hours for the temperature to stabilize to
the preset recommended settings.
35