Hansgrohe AXOR Starck 10755 1 Serie Instrucciones De Montaje / Manejo / Garantía página 2

⅞"
Tools Required / Outiles Utiles /
Herramientas Útiles
27 mm
24 mm
17 mm
3 mm
2
4¾"
2½"-3½"
English
Technical Information
Recommended water pressure
Max. water pressure
Recommended hot water temp.
Max. hot water temp
Flow rate
*Please know and follow all applicable local plumbing
codes when setting the temperature on the water heater.
Installation Considerations
• For best results, Hansgrohe recommends that
this unit be installed by a licensed, professional
plumber.
• Please read over these instructions thoroughly be-
fore beginning installation. Make sure that you
have all tools and supplies needed to complete
the installation.
• This trim is for use with rough valve model
10754181 (not included).
• To prevent scald injury, the maximum output tem-
perature of the shower valve must be no higher
than 120°F. In Massachusetts, the maximum out-
put temperature can be no higher than 112° F.
• This showerhead is for use with an automatically
compensating valve rated at 2.5 GPM (9.5 L/
min) or less.
• Keep this booklet and the receipt (or other proof
of date and place of purchase) for this product in
a safe place. The receipt is required should it be
necessary to request warranty parts.
This unit meets or exceeds the following:
• ASME A112.18.1
• CSA B125.1
• Listed by IAPMO for use in the US
and Canada
15 - 75 PSI
145 PSI
120° - 140° F*
176°F*
14.5 GPM