Publicidad
Idiomas disponibles
Idiomas disponibles
While operating power tools, you should consider
basic safety precautions to avoid the risk of fire,
electric shock and personal injury.
Always read the safety, operating and maintenance
instructions before you start using your power tool.
Keep the instruction manual for future reference.
These preventive measures are essential for your safety,
always operate the drywall sander carefully, responsibly
and considering that the user is responsible for any
accidents caused to third parties or their property.
The drywall sander may only be used by people who have
read the instruction manual and are familiar with its
handling. Before first use, the user must be properly and
practically trained by the salesman or other competent
person.
This instruction manual is an integral part of the power tool
and must always be provided.
Familiarize yourself with the control devices and use of the
drywall sander. In particular, the user must know how to
quickly stop the power tool.
Stay alert and use common sense while operating a power
tool. A moment of inattention can result in serious injury.
Do not use the drywall sander if you are not both physically
and mentally well. Do not operate it while you are tired or
under the influence of medication, drugs or alcohol. If you
have a health problem, ask your doctor if it is safe for you
to use the drywall sander before doing so.
Never allow the power tool to be used by children,
individuals with limited physical, sensory or mental
abilities, individuals with lack of experience and knowledge
of the machine, or others unfamiliar with the use
instructions.
The drywall sander may only be used as stated in this
instruction manual. Any other use, which may be
dangerous and may cause injury to the user or damage to
the power tool, is not permitted.
Do not overload or misuse the power tool. Using this drywall
sander for purposes other than the intended and the
improper use of accessories may result in dangerous
situations.
For safety reasons, any alteration to the power tool other
than the assembly of accessories authorised by the
manufacturer is prohibited. The warranty on your drywall
sander will be voided if you alter it in any way.
You may get information on authorized accessories from
your official VITO dealer.
Do not operate power tools in explosive environments,
such as in the presence of flammable liquids, gases
or dust. Power tools create sparks that can ignite liquids,
gases, or dust.
The supply voltage must match the information given
on the data plate of the power tool. The power cord
must be plugged into socket with differential protection.
The circuit breaker associated with the supply circuit must
be set to trip when there is a maximum fault current of
30mA.
Do not expose the power tool to rain or operate it in wet or
damp conditions. Water entering a power tool increases the
risk of damage and electric shock to the user.
Never use the power cord to pull, carry or unplug the power
tool. Damaged power cords increase the risk of electric
shock.
Keep the power cord and plug away from heat sources, oil,
sharp objects and rotating parts. Check the condition of the
power cord regularly, if it is damaged, it must be replaced
or repaired by a qualified technician.
Publicidad
