Publicidad
Idiomas disponibles
Idiomas disponibles
The suction power is adjusted on the suction power
regulator (12).
1. Turn
the
regulator
counterclockwise to increase the suction power.
The sander has an LED light (3) for use in dark places and
at night.
When you press the "ON/OFF" switch (9) the sander starts,
and the LED light turns on.
Before carrying out any cleaning, adjustment, accessory
replacement, repair or maintenance tasks, switch off the
power tool and unplug the power cord.
All maintenance and repair work requiring an opening of
the motor housing may only be carried out by the service
department of the brand.
In the event of excessive sparking, contact technical
assistance.
The motor will not start if the carbon brushes are worn out.
The brushes must be replaced in time, otherwise there will
be poor contact between the brushes and the rotor, which
may lead to sparks and damage to the power tool. Both
carbon brushes should be replaced at the same time by two
brushes with equal characteristics.
1. Loosen the fixing bolts (4) and remove the carbon
brushes;
2. Fit the new ones;
3. Insert and tighten the bolts.
On the perimeter of the Velcro pad guard (2) there is a
protective ring (1), which prevents the projection of
particles and reduces dust formation. If the ring is worn, it
must be replaced.
1. Detach the protective ring with a screwdriver;
2. Remove the ring and replace it with a new one;
3. Adjust the holes of the new protective ring on the
fastening pins at the base of the Velcro pad guard.
clockwise
to
reduce
Empty the dust bag before it is completely full.
1. Remove the dust bag;
2. Pour the accumulated dust inside the bag;
and
3. Fit the dust bag.
Cleaning
After each use, clean all the components of the drywall
sander. Clean the drywall sander with a clean, damp cloth
and blow it out with compressed air at low pressure.
Careful handling protects the power tool and extends its
service life.
Storage
When not in use, store the drywall sander in a dry, clean
place, free of corrosive smoke and out of children's reach.
The packaging is made up of recyclable materials,
which you can dispose on local recycling points.
Never dispose of power tools with your household
waste!
According to the European Directive 2012/19/EC on
electrical and electronic equipment waste and its
transposition into national law, power tools must be
collected separately and delivered to the collection sites
provided for this purpose.
You can get information regarding the disposal of the power
tool through the person in charge for recycling in your city.
WhatsApp:
E-mail:
+351 965 157 064
support@vito-tools.com
Publicidad
