Bimar FT-30MB Folleto De Instrucciones página 11

ASSEMBLY
Attention: the fan can be used only when completely and correctly assembled, that is
complete with its base and protection grid. If in doubt, have the appliance checked or
assembled by a qualified professional person. For assembly, refer to figure.
Attention: always unplug the appliance before you assemble.
1. Insert the rear grid (5) onto the motor shaft, so that the
handle is at the top (like in the figure to the side), securing it
using the 4 screws provided (4.)
2. Insert fan (2) onto the motor shaft (6) and attach it so that the
screw (3) touches the milling formed on the motor shaft (like in
the figure), (at the end of the work, check that the fan is
correctly secured).
1.
2.
3.
4.
5.
6.
7. Oscillation button
8. Housing
9. Clutch
10. Switch
11. Cord
12. Screw with nut
11/36
Front grill/protective
screen
Fan
Fan fixing screw
Rear grill fixing
screws
Rear grill
Motor shaft
screw
up/down)
(tilt