Publicidad
Idiomas disponibles
Idiomas disponibles
– Taking the measurement
For automatic personal recognition, the first measurement must be assigned to your personal user data.
The app will prompt you to do this. Step onto the scale, ideally with bare feet, and ensure that you are
standing still with equal weight distribution and with both feet on the electrodes.
Now continue with chapter "Take measurement".
8. Initial use of the scale without the app
We recommend using the app for the initial use and implementing all settings. See chapter 6 "Initial use
with the app" However, this can also be carried out on the device itself.
Remove the batteries from the protective packaging and insert the batteries into the scale ensuring that
the battery polarity is correct. If the scale does not function, remove the batteries completely and reinsert
them.
Place the scale on an even, hard surface; a hard surface is crucial to accurate measurements.
Press the "SET" button.
Set the year/month/day and hour/minute by pressing the buttons "
pressing the "SET" button.
The scale displays "0.0". Press the "SET" button again. "P-01" or the last used scale user memory will
appear. Select your user memory (P-01 to P-08) with the arrows "
out your settings, such as gender, height etc. (see chapter "Initial use with the app (table)". Confirm each
setting by pressing the "SET" button. A PIN will be displayed at the end of your settings. This will be
required for logging into the app later. Afterwards "0.0" is displayed.
For automatic personal recognition, the first measurement must be assigned to your personal user data.
Step onto the scale, ideally with bare feet, and ensure that you are standing still with equal weight distribu-
tion and with both feet on the electrodes.
7.1 Logging in to the app at a later time
If you have carried out the initial use of the scale without using the app, you can transfer or create your
user on the app as follows.
– Download the free "beurer HealthManager Pro" / "beurer HealthManager" app from the Apple
App Store (iOS) or at Google Play (Android™).
– Start the app and follow the instructions.
9. Take measurement
Place the scale on an even, hard surface; a hard surface is crucial to accurate
measurements.
9.1 Diagnostic functions
Step onto the scale with bare feet and ensure that you are standing still with equal
weight distribution and with both legs on the electrodes.
Note: The measurement result will be incorrect if the measurement is taken with
socks on.
The scale begins to take measurements straight away.
First, the weight is displayed.
During the BIA analysis, "
" is displayed.
20
" and confirm these settings by
" and press the "SET" button. Carry
Publicidad
