Publicidad
Idiomas disponibles
Idiomas disponibles
5. USE INSTRUCTIONS
1. Fill the water tank. You can fill the tank through the manual filling
hatch or by connecting the equipment to the network (if the network has
a lot of pressure, it is recommended to install a pressure reduction
valve). If the water level in the tank is very low, a red light will flash on
the control panel.
2. Connect the power cord.
3. Press POWER to turn on/off the equipment.
4. Press COOL/FAN to turn evaporative cooling on/off. When the evapora-
tive cooling is deactivated, the unit works like a fan (BLAST).
Note that when we activate the evaporative cooling, the unit takes a while to soak the
water filters before starting to cool the air.
5. Press SPEED to select one of 3 fan speeds: low, medium, or high.
6. Press SWING to activate/deactivate the horizontal air swing function.
7. Press TIMER with the equipment turned off to program the automatic
ignition of the equipment from 1 to 24 hours.
8. Press TIMER with the equipment turned on to program the automatic
shutdown of the equipment from 1 to 24 hours.
6. CLEANING AND MAINTENANCE
ALWAYS unplug the power cord before maintenance.
EQUIPMENT CLEANING:
Clean the surface of the appliance with a soft, damp cloth. Do not allow water to
fall inside the machine.
Please note that the surface should not be polished with sandpaper, waxed,
cleaned with gasoline, acid, alkali, benzene and other organic solvents to avoid
discoloration and deterioration.
08
Publicidad
