LF PROJECT SOURCE GT-S60LH Manual Del Usuario página 11

INSTALL YOUR VERTICAL DRAIN
2. Unscrew the screw of the vertical drain body and confirm whether the accessories of the
vertical drain body are complete.
3. Remove the drain grate, drain gasket and guide nut. Place the vertical drain body and groove
gasket on the underside and align with the tub drain hole.
Note that enough space must be reserved to avoid the vertical drain body against
the ground/wood pallet. Otherwise, the vertical drain will be damaged.
4. Place drain gasket, drain grate and guide nut in order inside the tub. And use 18mm Wrench
/Socket Wrench （or adjust to the right size with an adjustable wrench )to secure the vertical
drain by tightening the guide nut.
11
2
3
4