Uline TORNADO H-10400 Manual Del Usuario página 4

1
3
NOTE: Install loose parts for handle provided
with vacuum before using the vacuum for
first time.
1. Open the handle adjustment. (See Figure 3)
Figure 3
Handle
Adjustment
2. Push the handle metal tube into the mount all the
way to the lowest latching position (latches audibly
twice). (See Figure 4)
Figure 4
Handle
Metal Tube
PAGE 4 OF 28
HANDLE PARTS
HANDLE PARTS
2
HANDLE ASSEMBLY
3. Insert the handle into the handle metal tube and
latch into place. Ensure that the main cable is not
jammed or twisted. (See Figure 5)
4. Pull the handle to the first (uppermost) latching
position. (See Figure 6)
Mount
# DESCRIPTION
1 Handle with Main Power Cable
2 Handle Metal Tube
3 Suction Pipe with Suction Hose
Figure 5
Handle
Metal Tube
Figure 6
QTY.
1
1
1
Handle
0323 IH-10400