Publicidad
Step 14
Push the RUBBER SLEEVES (2R) over the METAL PINS (1R). Insert the METAL PINS into the hole locations of your choice
å
in the ENDS (A and B) and UPRIGHTS (C and D). Set the ADJUSTABLE SHELVES (J2 and K) onto the METAL PINS.
Insert two HOLE PLUGS (41P) into the holes in the BOTTOM (NN).
å
Apply the WARNING LABEL (4L) to the TOP (E2). You should be able to read the label when the TV is removed from the
å
unit. When the TV is in place, it should hide the label. Peel off the backing and apply the label as shown in the diagram.
NOTE: This is a permanent label intended to last for the life of the product. Once applied, do not try to remove it.
å
NOTE: Please read the back pages of the instruction booklet for important safety information.
å
This completes assembly. Clean with your favorite furniture polish or a damp cloth. Wipe dry.
å
And to celebrate, why not share your success story?
K
25 lbs.
B
41P
Page 18
4L
E2
135 lbs.
D
J2
25 lbs.
C
NN
1R
(12 used)
403679
Never use this furniture with a TV that is too
large or too heavy. Severe injury or death can
occur. The TV and furniture will be unstable
and may tip.
- The TV must weigh less than 135 lbs.
- The base of the TV must be able to sit
completely on this shelf.
K
25 lbs.
50 lbs. total
2R
WARNING
A
www.sauder.com/services
Publicidad
