Publicidad
Idiomas disponibles
Idiomas disponibles
• If the appliance is placed on its back or side during transportation, upon reaching the destination,
allow it to remain upright for six hours before plugging in to avoid damage to the internal
components.
DISPOSAL
This appliance may not be treated as regular household waste; it should be taken to the appropriate
waste collection point for recycling electrical components. For information on local waste collection
points, contact your local waste removal agency or government office.
TROUBLESHOOTING
PROBLEM
No power.
Internal temperature not cold enough.
Appliance runs continuously.
Condensation on the cabinet or door
POSSIBLE CAUSE
•
A fuse may be blown or the circuit breaker
tripped.
•
Plug is not fully inserted into the wall outlet.
•
Temperature setting is too warm.
•
Door is not shut properly or opened
excessively.
•
Exhaust vent is obstructed.
•
A large quantity of warm contents has
recently been added to the equipment.
•
Close proximity to heat source or direct
sunlight.
•
Ambient temperature or humidity is very
high.
•
More
space
equipment: 12.7 cm of space between the
back, sides and top of the appliance and all
adjacent walls.
•
Door is not shut properly or opened
excessively.
•
Ambient temperature or humidity is very
high.
28
is
needed
around
the
Publicidad
