Jonsered 500 BAT Manual Del Operador página 9

CHARGE THE BATTERY
• Before using for the first time
• If your lawnmower is not used for
more than one month.
• ALWAYS charge the battery
immediately after use!
1. Remove the safety
key (E).
(If the safety key
is not removed,
the Battery
Charge Indicator
light will flash
twice repeatedly
for approximately
1 minute.)
2. Connect the
charger cable to
the socket.(F)
3. Connect the
charger cable to
the mains supply and switch on.
4. WHAT THE LIGHT INDICATOR
SHOWS WHEN CHARGING (G):
Flashing Red light = Battery 0 - 5%
Steady amber light = Battery 5 - 30%
Flashing green light = Battery 30 - 60%
Steady green light = Battery 60 -100%
• Approximately 16 hours to full charge.
• There is a usable charge when the
light is steady green or flashing green
• When charging is complete. Switch off
at the mains and remove the charger
cable from the socket (F).
• NOTE
The 500 Bat can be left connected to
the charger permanently, with the
charger switched on, without risk of
overcharging.
BATTERY CHARGING
G
LIGHT
E
F
5. WHAT THE LIGHT INDICATOR
Steady green light
Flashing green light
Steady amber light
Flashing Red light
6. STEADY RED LIGHT WHEN
•
•
•
•
•
SHOWS WHEN MOWING (G):
= Battery 100 - 60%
= Battery 60 - 35%
= Battery 35 - 10%
= Battery 10 - 0%
MOWING
On starting the lawnmower, whilst the
motor gets to normal speed.
On stopping the lawnmower, when the
brake is engaged.
The lawnmower motor is overloaded -
see "How to Mow".
The battery needs to be charged.
For maximum battery life
ALWAYS charge the battery
immediately after use!
4 - English