Publicidad
Idiomas disponibles
Idiomas disponibles
If a tolling device (OBU) for the same toll domain is already installed, please remove it and put it into
the device bag of your tolling service provider or any other shielded bag (e.g. alufoil) to prevent it from
generating tolling transactions. Ideally the old OBU should be removed from the vehicle. After completing
the installation steps, the unit will start when the power cable is connected. In case the message „Waiting
for vehicle data" is shown on the display, please wait until the final configuration of the OBU is downloaded.
Once the download is completed, the message ‚Waiting for vehicle data' will disappear from the display. v
CAUTION
In order to function properly, the unit must undergo four different activation steps.
1. Select Language
2. Set Number of Axles
3. Set Weight
4. Check vehicle license plate number
For your own safety, any interaction with the unit shall only be done when the vehicle is stopped . The
buttons are non-operational at speeds above 10 km/h. For a complete overview of the OBU menu structure
and navigation of the unit please refer to chapter 4.6: Menu Overview.
10.1.
Select Language
1
English
Francais
Espanol
INFORMATION
For a list of supported menu languages and display phrases see Appendix A: Supported Menu Languages.
10.2.
Set Axles
CAUTION
Please note, that lifted axles must be included as well! Also make sure to always select the actual and
correct number of axles (and the correct weight) before your trip starts. If axles and weight are not
correctly set, you risk enforcement procedures and high penalties to be paid by the user.
2
Choose your language using the and navigation
buttons and confirm by pressing the selection button .
English
Francais
Espanol
INFORMATION
23
Publicidad
