Hilti SID 4R-22 Manual De Instrucciones página 34

4 Technical data
4.1 Technical data
Rated voltage
Weight in accordance with EPTA procedure 01,
without battery
Tool holder
Speed adjustment
Rated speed under no load
Impact speed
Large standard bolts
Large high-strength bolts
Storage temperature
Ambient temperature for operation
4.2 Battery
Battery operating voltage
Weight, battery
Ambient temperature for operation
Storage temperature
Battery charging starting temperature
4.3 Noise information and vibration values in accordance with EN
62841
The sound pressure and vibration values given in these instructions were
measured in accordance with a standardized test and can be used to
compare one power tool with another.
preliminary assessment of exposure.
The data given represent the main applications of the power tool. However,
if the power tool is used for different applications, with different accessory
tools, or is poorly maintained, the data can vary. This can significantly
increase exposure over the total working period.
An accurate estimation of exposure should also take into account the times
when the power tool is switched off, or when it is running but not actually
being used for a job. This can significantly reduce exposure over the total
working period.
30 English
21.6 V
1.2 kg
/ " hex. socket
1
4
with locking ring
2 settings
Setting I 0 /min ...
1,600 /min
Setting II 0 /min ...
2,250 /min
≤ 3,800 bpm
M6 ­ M10
M6 ­ M8
−20 ℃ ... 60 ℃
−17 ℃ ... 60 ℃
21.6 V
See the end of these
operating instructions
−17 ℃ ... 60 ℃
−20 ℃ ... 40 ℃
−10 ℃ ... 45 ℃
They can also be used for a
2373958
*2373958*