USING THE TURBO MODE BUTTON
The TURBO (4) mode button has two speed settings. Push the button
up (sport mode) for a quick cut or for cutting very thick hair. Push the
EN
button down (normal mode) for cutting thinner hair.
MAINTENANCE AND STORAGE
Switch the appliance off and clean immediately after each use or if the
cutting head is excessively fouled with hair or dirt.
• Do not use powdered products, abrasive liquid products or
solvents such as alcohol or petroleum-based products to clean the
appliance.
• Do not immerse the appliance in water or any other liquid as this
will damage the appliance itself.
WARNING! Always disconnect the
appliance from the socket before
cleaning or performing maintenance.
WARNING! Before every use of the
appliance lubricate the blades well along
their entire length using the oil supplied
in the package. At the end of every use
clean the blades with the comb supplied
and lubricate them again.
WARNING! Keep the oil (9) out of reach of
children. Do not inhale or ingest and avoid
contact with the skin or eyes. Seek
medical attention if necessary, showing
the container or label of the product.
25