Timer 1 Function - gefran AGL50-EV Manual De Instrucciones

7.6 Timer 1 function (from fw 03.07)
The timer function allows to apply delays and pulses to an input signal selected from a pick list.
Menu A - APPLICATION
Cod. Display (Description)
A.320 Timer 1 mode
Select working mode of Timer 1
[0] Disable
On delay
Timer 1 in
Timer 1 out
T
T = Timer 1 delay
[1] On delay
[2] Off delay
38
Timer 1 delay
Timer 1 set src
Timer 1 mode
[0] Disable
[1] On delay
[2] Off delay
[3] On/Off delay
[4] Pulse
[5] Sym flasher
Output is always 0ff
t<T
The closure of the Input (On) is transferred on Output after pre-set time has elapsed.
The closure of the Input (On) is transferred immediately on the Output.
The opening of the Input (Off) initiates the pre-set delay, after which the Output is reset (Off).
Timer 1
Off
On delay
Off delay
Timer 1 out
On/Off delay
Pulse
Sym flasher
Off delay
Timer 1 in
Timer 1 out
T
T = Timer 1 delay
Def. Min.
0 0
T
T
AGL50-EV
Max
5