Bosch Professional GSB 14,4-2-LI Plus Manual Original página 15

The battery can be damaged by pointed objects such
u
as nails or screwdrivers or by force applied externally.
An internal short circuit may occur, causing the battery to
burn, smoke, explode or overheat.
Only use the battery with products from the manufac-
u
turer. This is the only way in which you can protect the
battery against dangerous overload.
Protect the battery against heat, e.g. against
continuous intense sunlight, fire, dirt, water
and moisture. There is a risk of explosion and
short-circuiting.
Switch the power tool off immediately if the applica-
u
tion tool becomes blocked. Be prepared for high
torque reactions which cause kickback. The applica-
tion tool becomes blocked when it becomes jammed in
the workpiece or when the power tool becomes over-
loaded.
Product Description and
Specifications
Read all the safety and general instructions.
Failure to observe the safety and general in-
structions may result in electric shock, fire
and/or serious injury.
Please observe the illustrations at the beginning of this oper-
ating manual.
Technical Data
Cordless drill/driver
Combination cordless drill
Article number
Rated voltage
A)
No-load speed
– First gear
– Second gear
A)
Impact rate
Max. torque, hard/soft screw-
driving application according to
A)
ISO 5393
Max. drilling diameter
– Masonry
– Steel
– Wood
Chuck capacity
Screw diameter max
Weight according to
A)
EPTA-Procedure 01:2014
Recommended ambient tem-
perature during charging
Bosch Power Tools
Intended use
The power tool is intended for driving and loosening screws
and for drilling in wood, metal, ceramic and plastic. The GSB
is also designed for impact drilling in brick, masonry and
stone.
Product Features
The numbering of the product features refers to the diagram
of the power tool on the graphics page.
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
(9)
(10) Rotational direction switch
(11) On/off switch
(12) Bit holder
(13) Handle (insulated gripping surface)
A) Accessories shown or described are not included with the
GSR 14,4-2-LI Plus GSR 18-2-LI Plus GSB 14,4-2-LI Plus
3 601 JE6 0..
V 14.4
-1
min 0–500
-1
min 0–1900
-1
min –
Nm 59/21
mm –
mm 13
mm 35
mm 1.5–13
mm 7
kg 1.4–1.7
°C 0 to +35
Tool holder
Keyless chuck
Torque presetting ring
Mode selector switch (GSB)
Gear selector switch
Belt clip
A)
Battery
A)
Battery release button
Worklight
A)
product as standard. You can find the complete selection of
accessories in our accessories range.
3 601 JE6 1.. 3 601 JE7 0..
18 14.4
0–500 0–500
0–1900 0–1900
– 0–28,500
63/24 59/21
–
13
38
1.5–13 1.5–13
8
1.6–2.7 1.5–1.7
0 to +35 0 to +35
1 609 92A 583 | (13.12.2019)
English | 15
GSB 18-2-LI Plus
3 601 JE7 1..
18
0–500
0–1900
0–28,500
63/24
13 13
13 13
35 38
1.5–13
7 8
1.6–2.7
0 to +35