Notes; Overview Drawing; Receiving The Product; Inspecting The Product - Grundfos Unilift KP 150 Instrucciones De Instalación Y Funcionamiento

Ocultar thumbs Ver también para Unilift KP 150:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

2.2 Notes

The symbols and notes below may appear in
Grundfos installation and operating instructions,
safety instructions and service instructions.
Observe these instructions for
explosion-proof products.
A blue or grey circle with a white
graphical symbol indicates that an
action must be taken.
A red or grey circle with a diagonal
bar, possibly with a black graphical
symbol, indicates that an action must
not be taken or must be stopped.
If these instructions are not observed,
it may result in malfunction or damage
to the equipment.
Tips and advice that make the work
easier.

2.3 Overview drawing

With float switch
Fig. 1
Unilift KP pump
Pos.
Description
1
Outlet port 1.25" NPT
2
Handle
3
Clamp
4
Inlet strainer
5
Pump housing
6
Float switch (optional)
6

3. Receiving the product

CAUTION
Crushing of feet
Minor or moderate personal injury
- Wear safety shoes when handling
the product.
- Use the pump handle to move the
pump. Do not lift it by the power
cable.

3.1 Inspecting the product

Check that the product received is in
accordance with the order.
Check that the voltage and frequency of the
product match the voltage and frequency of the
installation site.

3.2 Scope of delivery

The box contains the following items:
pump
power cable
float switch (if included with the model)
installation and operating instructions.

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Unilift kp 250Unilift kp 350

Tabla de contenido