Notes; Target Group; Receiving The Product; Inspecting The Product - Grundfos SQF Manual Del Usuario

The hazard statements are structured in the following way:
SIGNAL WORD
Description of the hazard
Consequence of ignoring the warning
• Action to avoid the hazard.

1.2 Notes

The symbols and notes below may appear in Grundfos installation and operating instructions, safety instructions and service instructions.
Observe these instructions for explosion-proof products.
A blue or grey circle with a white graphical symbol indicates that an action must be taken.
A red or grey circle with a diagonal bar, possibly with a black graphical symbol, indicates that an action must not be taken or must be
stopped.
If these instructions are not observed, it may result in malfunction or damage to the equipment.
Tips and advice that make the work easier.

1.3 Target group

These installation and operating instructions are intended for professional installers and for the operators of the product.

2. Receiving the product

2.1 Inspecting the product

On receipt of the product, do the following:
1. Check that the product is as ordered.
If the product is not as ordered, contact the supplier.
2. Check that no visible parts have been damaged.
If any visible parts have been damaged, contact the transport company.

2.2 Scope of delivery

The box contains the following items:
Quantity Description
1 SQF pump
1 Installation and operating instructions for the SQF pump
1 Quick guide
1 Separate nameplate
(1) Terminal kit (Optional. Market specific)

3. Installing the product

3.1 Location

The motor must be installed below the water level.
The separate nameplate supplied with the product must be fixed close to the installation site.
6