lubluelu A901+C710 Manual Del Usuario página 20

Function Module
Zone Clean
1.Select "Zone Clean" in the APP and click "+ Zone Clean" in the right.
Select an area to be cleaned on the map and click "Start", the robot
will start the cleaning within the customized area.
Zone Clean
Note:
Please clear the obstacles around the designated area to ensure the robot can access.
The map needs to be generated in the APP before use.
Point Clean
1.Select "Point Clean" in the APP.
2.Select a point to be cleaned on the map, then click "Start Cleaning" to start cleaning.
3.The robot will move to the designated location and clean an area of 1.5m×1.5m square
with itself as the center, then return to the base for charging.
Note
:
The map needs to be generated in the APP before use.
1.5 m
Forbidden Area
Select "Forbidden Area" in the APP and set the forbidden area, then save the settings
and the robot will not access to the set area for cleaning.
Note:
The map needs to be generated in the APP before use.
The selected forbidden area should not be too close to the charging base; otherwise,
the robot and the APP will report error.
When robot Vacuum is moved or the domestic environment has significantly changed,
the map may become invalid and the restricted area may get lost.
Forbidden Area
18