lubluelu A901+C710 Manual Del Usuario página 29

Malfunctions and Troubleshooting
Robot Status
Fall (Anti-Drop Sensor
Alarm)
LDS Abnormal
Wheel electricity abnormal
Main bumper abnormal
LDS LiDAR bumper
abnormal
Fall (Wheel abnormal)
Robot stuck
Side brush is abnormal
Rolling brush is abnormal
*Attention
The status of the robot light indicator for the voice error message is "red light is always on".
27
APP Prompt
Cliff Sensor Error, please clean the cliff sensor and start the
robot away from the cliff.
LDS Error, please check LDS and move robot to new location
and start.
Wheel Error, please turn the wheels and clear by hand.
Bumper Error, please clean the bumper and tap it.
LDS Bumper Error, please move robot and tap the LDS
bumper.
Wheel is suspended, please put the robot on the ground and
start.
Robot is stuck, please help robot to get out of trouble.
Side brush is abnormal, please check whether it is entangled.
Roll brush Error, please check roll brush and clean up.
Voice Prompt
Anti-drop sensors error, pls put the robot on the ground to
start it, please start the robot after putting it on the ground.
Please make sure the LDS LiDAR head is not blocked
or stuck.
Please check whether the driving wheel is stuck.
Please check and tap the robot main bumper.
Please check whether the laser bumper is stuck.
Wheel is suspended, please put the robot on the ground to
start it.
Please help the robot to get out of trouble.
Please check the side brush whether it is entangled.
Please check the roller brush whether it is entangled.