lubluelu A901+C710 Manual Del Usuario página 25

Maintenance
Clean the Charging Base
1.Remove the upper cover.
2.Take out the bag full of dust.
23
3.Take out the filter for cleaning.
4.Install the filter and new bag.
5.If the duct is blocked by foreign matters, place the robot flat and
remove the screws on the lower shell of with a screwdriver.
6.Remove the lower shell and clean the air duct.
7.Clean the charging electrodes of the base (once a month)
Notes:
The charging electrodes, the anti-drop sensor and the wall TOF sensor include sensitive electronic components,
please wipe with a dry paper tissue for cleaning to prevent component being damaged by wet wipes.