Jeep JUC AS Manual De Uso página 22

• Prior to using the item for the first time, charge to 100%.
• Check tyre pressure (see side of tyre for recommended value). If the item does not reach at least 60% of the declared
kms, or the maximum speed within the first 3 months of use, it is likely that the wheels have deflated once more. In this
case, restore pressure as indicated.
• Check and adjust the brakes.
• Switch on the display.
• Place the item onto a flat surface.
• Hold the handlebars firmly using both hands. Step onto the footrest with one foot and use the other to give yourself a
gentle push and accelerate.
CAUTION
Zero Start Function: the accelerator is activated once the forward speed exceeds 3 km/h.
For safety reasons, the item is initially set up to avoid standing starts.
• When riding the product, tilt the body towards the riding direction during a turn and slowly rotate the handlebars.
• To stop the item, release the accelerator, pull the brake lever
• To get off, first stop the item completely. Getting off the moving item can cause injury.
• Prior to each use, check brakes and any wear, check tyre pressure (see side of tyre for recommended value), wheel
wear, throttle and charge status of battery.
Brake lever position
Models Reference picture
JUC AS
JAD AS
JAF SR
JAF AS
JXP
6. Quick guide
21
Indications
It is possible to adjust the
position of the brake lever,
if necessary, by unscrewing
the screw (A). Once the
position has been adjusted,
tighten the screw (A).
It is possible to adjust the
position of the brake lever,
if necessary, by unscrewing
the screw (A). Once the
position has been adjusted,
tighten the screw (A).
It is possible to adjust the
position of the brake lever,
if necessary, by unscrewing
the screw (A). Once the
position has been adjusted,
tighten the screw (A).