Forch 5326 125 1 Manual Del Usuario página 66

E N G L I S H
– Risk of burns due to accessories becoming
hot during operation.
– Risk of personal injury due to prolonged use.
– Risk of dust from hazardous substances.
Markings on Tool
The following pictograms are shown on the tool:
Read instruction manual before use.
Wear ear protection.
Wear eye protection.
DATE CODE POSITION (FIG. 1)
The Date Code (p), which also includes the year
of manufacture, is printed into the housing.
Example:
2009 XX XX
Year of Manufacture
Package Contents
The package contains:
1 Angle grinder
2 Guards (115mm/125 mm)
1 Side handle
1 Flange set
1 Two-pin spanner
1 Kitbox (K-models only)
1 Instruction manual
1 Exploded drawing
• Check for damage to the tool, parts or
accessories which may have occurred during
transport.
• Take the time to thoroughly read and
understand this manual prior to operation.
Description (fi g. 1)
WARNING: Never modify the power tool
or any part of it. Damage or personal
injury could result.
a. On/off switch
b. Spindle lock
c. Guard
d. Side handle
INTENDED USE
The 5326 125 1 / 5326 125 2 heavy-duty angle
grinders have been designed for professional
grinding and cutting applications.
66
DO NOT use grinding wheels other than center
depressed wheels and fl ap-disk.
DO NOT use under wet conditions or in presence
of fl ammable liquids or gases.
These heavy-duty angle grinders are professional
power tools.
DO NOT let children come into contact with the
tool. Supervision is required when inexperienced
operators use this tool.
Anti-vibration Side Handle
5326 125 1
The anti-vibration side handle offers added
comfort by absorbing the vibrations caused by the
tool.
Keyless Guard
5326 125 1
The keyless guard allows for quick adjustment
during the application to enhance application
versatility.
Dust Ejection System (fi g. 1)
5326 125 1
The dust ejection system (e) prevents dust pile-up
around the guard and motor inlet, and minimises
the amount of dust entering the motor housing.
Electrical Safety
The electric motor has been designed for one
voltage only. Always check that the power supply
corresponds to the voltage on the rating plate.
Your Förch tool is double insulated in
accordance with EN 60745; therefore no
earth wire is required.
If the supply cord is damaged, it must be replaced
by a specially prepared cord available through the
Förch service organization.
Mains Plug Replacement
(U.K. & Ireland Only)
If a new mains plug needs to be fi tted:
• Safely dispose of the old plug.
• Connect the brown lead to the live terminal in
the plug.
• Connect the blue lead to the neutral terminal.
WARNING: No connection is to be made
to the earth terminal.
Follow the fi tting instructions supplied with good
quality plugs. Recommended fuse: 13 A.