Samsung NX58K9500W Serie Manual Del Usuario página 52

Gliding rack (NX58H9950W* Only)
To apply the graphite lubricant
1. Remove the gliding rack from the oven.
2. Fully extend the gliding rack on a table. It is
a good idea to put newspaper beneath the
rack for later cleanup.
3. If the sliding tracks are contaminated, remove
impurities using a paper towel. Reapply
the graphite lubricant according to the
instructions below:
1. Shake the graphite lubricant before opening
it.
2. Apply 4 drops of lubricant to the inner side of
the left sliding track, and 4 drops to the outer
side of the left sliding track.
3. Repeat step 2 above on the right sliding track.
4. Extend and collapse the gliding rack several
times to distribute the lubricant.
English - 52