Descargar Imprimir esta página

Samsung NX58K9500W Serie Manual Del Usuario página 57

Ocultar thumbs Ver también para NX58K9500W Serie:

Publicidad

Idiomas disponibles

Idiomas disponibles

CAUTION Do not use the surface burners while the gas oven is performing a self-cleaning cycle.
To delay starting the self-cleaning cycle
2
1. Repeat steps 1 and 2 on the previous page.
2. Press the Delay Start button. The oven door locks.
3. Set the time you want the oven to start self-cleaning using the number pad.
4. Press the START/SET button. The oven will start self-cleaning at your specified time.
To cancel the self-cleaning cycle
You may find it necessary to stop or interrupt a self-cleaning cycle due to smoke in the oven. To turn
off the self-cleaning cycle, press the OFF/CLEAR button. The cycle turns off, but the door remains
locked and the Lock icon blinks until the oven temperature falls below 392 °F (200 °C).
After self-cleaning
The door stays locked until the internal oven temperature falls below 392 °F.
When the oven has cooled down, wipe the oven surfaces with a cloth to remove ash residue.
Stubborn stains can be removed using a steel-wool pad. Lime deposits can be removed using a
vinegar-soaking cloth.
If you are not satisfied with the cleaning results, repeat the cycle. "HOT" appears on the display
until the oven cools down. Wait until the message disappears, and start a new cycle.
CAUTION Do not attempt to open the oven door immediately after the self-cleaning cycle
is complete. The oven is still very hot when the door unlocks. Escaping hot air and/or steam
could burn you.
English - 57
3
4

Publicidad

loading

Este manual también es adecuado para:

Nx58h9500w serieNx58h9950w serieNx58k9500wgNx58k9500w