Lionelo Braam i-Size Manual De Usuario página 16

- Mounting via ISOFIX
and car belts – Mounting
via car belts only
Children less than 125
cm tall – upright position
only
REARWARD FACING (40 – 105 CM)
Note! Children under 61 cm in height can only use the seat with a reduction insert (fig. C).
1.
Extend the stabilisation leg (fig. 1 and 2).
2.
Place the seat on the sofa of the car.
3.
Press the sliding lever and extend the ISOFIX arms (fig. 3). Anchor the ISOFIX arms
to the anchorages located in the car's sofa (fig. 4). The arms will interlock and you will
hear the characteristic click. The green indicator on the ISOFIX button must be visible
on both sides of the seat.
4.
Ensure that the anti-rotation frame is pressed firmly against the backrest of the sofa
in the car (fig. 5). Push the seat towards the backrest. Push the base using a left-right
movement towards the back of the vehicle seat until it is completely aligned with the
back of the anti-rotation frame.
5.
Press the stabilisation leg adjustment button. Its retractable part should extend
automatically (fig. 6a).
6.
Adjust the leg height so that the foot meets resistance from the vehicle floor. Now you
can let go of the button.
7.
Make sure that the stabilisation leg extension indicator is green and that the leg touches
the ground of the car (fig. 6b) and is not crooked (fig. 6c).
NOTE! Never mount the foot from the support leg on the glove box in the floor of the car.
This poses the risk of the glove box being blown off during an accident. If in doubt, refer to
the vehicle's instruction manual.
NOTE! The support leg must never hang in the air and no objects may be placed under it.
8.
Press the seat rotation button (19, fig. B) and then move the seat to a lateral position,
at an angle of 90° (fig. 7).
9.
Loosen the shoulder belts of the seat by pressing the belt adjustment button (fig. 8)
Use the belt retaining magnets for easy insertion of your child into the seat.
EN
Forward
facing
‑ 16 ‑
From 100 to
150 cm