Waterpik WP-110 Manual Del Usuario página 8

8
GETTING STARTED
Plug the cord into an electrical outlet. If the outlet is
controlled by a wall switch, be sure it is turned on.
Preparing the Reservoir
Remove reservoir and cover from base. Fill
the reservoir with lukewarm water. Replace the
reservoir over the base and press down firmly.
Inserting and Removing Tips
Insert tip into the center of the knob at the top of
the Water Flosser handle. The colored ring will be
flush with the end of the knob if the tip is correctly
locked into place. To remove tip from the handle,
press the tip eject button and pull tip from handle.