Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
• Do not subject the TC-16 to shocks—especially avoid dropping or banging
it on anything hard.
• If condensation forms on the TC-16 body, wipe it with a dry soft cloth. If it
forms on the lens itself, observe the following—
use a blower brush to clean all glass surfaces; as much as possible avoid
using lens tissue. Gently wipe dirt, smudges or fingerprints with soft cotton
moistened with a small amount of absolute alcohol, using a spiral motion
from center to periphery. Make sure you leave no wiping traces.
If you use ether in cleaning the lens surface, smudges may appear on the
surface; should this happen, wipe the smudges with a cotton cloth mois-
tened with absolute alcohol.
• Altach both front and rear lens caps BF-1 and LF-1 to your TC-16 when stor-
ing 1 1 separately, preferably inside the optional lens pouch No. 61; also, avoid
storage in a high-temperature and high-humidity place.
ACCESSORIES
Supplied
Front lens cap BF-1
Rear lens cap LF-1
Optional
Flexible lens pouch No. 61
SPECIFICATIONS
Lens construction:
5 elements in 5 groups
Focal length:
1.6X thai of lens in use (with in-focus at infinity)
Aperture coupling range:
f/1 B to f/32
Effective aperture:
f/2.9 to f/51
Focusing:
Via built-in micro motor to move all lens groups
Power switch:
Provided; "ON/OFF" type
Battery source:
Via electrical contact pins directly from the
battery power inside DX-1 AF Finder
Focus lock:
Possible via one focus lock button provided
Diaphragm:
Automatic diaphragm coupling provided
Exposure measurement:
Via full aperture method; meter coupling ridge
provided
Reproduction ratio:
1.6X that of lens in use
Depth of field:
1/1.6X that of lens in use (with in-focus at
infinity)
Mount:
Nikon F mount (for both sides); AF electrical
coupling pins provided on the rear side
Dimensions:
Approx. 88mm dia. x 43.8mm long (overall);
21 mm extension from flange
Weight:
Approx. 285g
21
Publicidad
Tabla de contenido
