Worx Chopper WX801.X Manual Original página 15

Thickness of grinding disc
Disc size
Disc bore
Machine weight (bare tool)
**Voltage measured without workload. Initial battery
voltage reaches maximum of 20 volts. Nominal voltage
is 18 volts.
***X=1-999, A-Z, M1-M9 there are only used for different
customers, there are no safe relevant changes between
these models
NOISE INFORMATION
A weighted sound pressure
A weighted sound power
Wear ear protection.
VIBRATION INFORMATION
4 mm
76 mm
Vibration total values (triax vector sum) determined
10 mm
according to EN 60745:
0.7 kg
surface grinding or
abrasive cutting off
The declared vibration total value may be used for
comparing one tool with another, and may also be used in
a preliminary assessment of exposure.
declared value depending on the ways in which the tool is
L = 80.9 dB(A)
used dependant on the following examples and other
pA
variations on how the tool is used:
K = 3 dB(A)
pA
How the tool is used and the materials being cut.
The tool being in good condition and well maintained
L =91.9 dB(A)
wA
The use the correct accessory for the tool and ensuring it
K =3 dB(A)
wA
is sharp and in good condition.
The tightness of the grip on the handles and if any anti
vibration accessories are used.
And the tool is being used as intended by its design and
these instructions.
This tool may cause hand-arm vibration syndrome if
its use is not adequately managed.
Vibration emission value
a = 3.693 m/s
h,AG
Uncertainty K = 1.5 m/s²
WARNING: The vibration emission value during
actual use of the power tool can differ from the
2
15