Publicidad
Idiomas disponibles
Idiomas disponibles
Specifications
Range
Sensing angle
Electrical load - incandescent
Electrical load - self-ballasted CFL (SBCFL)
Power requirements
Operating modes
Bulb modes
Time delay
DualBrite timer
Pre-Installation
PLANNING INSTALLATION
Before installing the light fixture, ensure that all parts are present (see Hardware Included on page 4). If any part is
missing or damaged, do not attempt to assemble, install, or operate this light fixture.
Estimated installation time: 30 minutes
TOOLS REQUIRED
Phillips
screwdriver
Wire strippers/
cutters
Electrical tape
Up to 70 ft. (21.3 m) - Varies with surrounding temperature
Up to 110°
Up to 240 watt maximum (Up to 120 watt maximum per bulb
holder)
Up to 60 watt maximum PAR 38 dimmable SBCFL (Up to 30 watt
maximum per bulb holder) - Outdoor rated
120 VAC, 60 Hz
Test, Auto, Manual
Security, BulbSaver, AlertFlash
1, 5, 20 minutes
Off, 3 hours, 6 hours, dusk-to-dawn
Flathead
screwdriver
Circuit tester
Silicone sealant
Safety goggles
3
Please contact 1-866-308-3976 for further assistance.
Pliers
Work gloves
Ladder
HOMEDEPOT.com
Publicidad
