Publicidad
Idiomas disponibles
Idiomas disponibles
TILT&LIFT 25 WF ZIGBEE
Using the favourite position (my)
▪ If a favourite position (my) is programmed, briefly press the my button on the
control point twice in succession to move the motorised product to the
favourite position (my).
3.3.Tips and advice on operation
3.3.1.Questions about the product?
Observations
The motorised product does not
operate.
The motorised product stops before its
end limit.
NOTICE
If the motorised product still does not work, contact a drive and home automation professional.
4.TECHNICAL DATA
Power supply
Radio frequency
Frequency bands and maximum power used
Torque
Speed
Minimum distance between limits
Zigbee version
®
Bluetooth
version
Electric insulation
Operating temperature
Protection rating
Charging temperature
NOTICE
For additional information on the technical data for this drive contact your Somfy representative.
Please separate storage cells and batteries from other types of waste and recycle them via the local collection
facility.
We care about our environment. Do not dispose of the appliance with usual household waste. Give it to an
approved collection point for recycling.
©
Copyright
2023 SOMFY ACTIVITES SA. All rights reserved.
Possible causes
The control point battery is low.
Drive battery is low and requires charge.
Red LED blinks 3 times when any button
of a paired control point is pressed.
The thermal protection has activated.
Drive battery is low and requires charge.
Red LED blinks 3 times when any button
of a paired control point is pressed.
12 Vdc class 2 power supply SELV + LPS
2.4 GHz
2.4 GHz - 2.4835 GHz e.r.p < 63mW [USA, Australia, Canada]
0.8 N·m
30 RPM
1 turn
3.0
4.2
III
0° to 60°
IP20 (for indoor use only)
0° / 40° C
x 2 =
Solutions
Check the battery and replace it as
required.
Plug in the charger.
Wait for the drive to cool down.
Plug in the charger.
EN
15
Publicidad
