Publicidad
Idiomas disponibles
Idiomas disponibles
TILT&LIFT 25 WF ZIGBEE
The way to control a Zigbee motorised product is different depending on the solution present in the installation: TaHoma
switch solution or TaHoma ready solution.
Please refer to the corresponding section according to the solution.
3.1.Use with TaHoma switch solution
3.1.1.Use with TaHoma application
To control the motorised product in connected mode, you need to access and use TaHoma application, you must have a
compatible phone or mobile device and access to the internet.
The application is downloadable for free from Apple Store platforms and Google Play Store on Apple or Android
compatible mobile devices. This compatibility is the one indicated in the description of the application on the corresponding
Store.
The software version of the TaHoma application may be updated from time to time to add new features and services.
1] Download TaHoma application if it is not yet installed on the smartphone.
2] Launch the application and follow the instructions to control the motorised
product.
3.1.2.Use with a control point
Up and Down buttons
1] For tiltable motorised products:
▪ Briefly press the Up or Down button on the control point to raise or lower
the motorised product fully.
▪ Press and hold the Up or Down button on the control point until the
motorised product reaches the desired position. The movement stops when
the button is released.
2] For other motorised products:
▪ Briefly press the Up or Down button on the control point to raise or lower
the motorised product fully.
Stop function
▪ Briefly press the my button on the control point to stop the motorised
product.
Favourite position (my)
NOTICE
An intermediate stop, which is called the "favourite position (my)", is different from the upper and lower positions.
Programming or modifying the favourite position (my)
NOTICE
Only one favourite position (my) is permitted.
©
Copyright
2023 SOMFY ACTIVITES SA. All rights reserved.
1]
2]
EN
™
13
Publicidad
