Boss BR-1600 CD Manual Del Usuario página 291

General Purpose Controller 7 (Controller number 82)
Status 2nd byte
BnH 52H
n = MIDI channel number:
vv = Control value:
General Purpose Controller 8 (Controller number 83)
Status 2nd byte
BnH 53H
n = MIDI channel number:
vv = Control value:
Portamento control (Controller number 84)
Status 2nd byte
BnH 54H
n = MIDI channel number:
kk = source note number:
Effect 1 (Reverb Send Level) (Controller number 91)
Status 2nd byte
BnH 5BH
n = MIDI channel number:
vv = reverb send level:
Effect 3 (Chorus Send Level) (Controller number 93)
Status 2nd byte
BnH 5DH
n = MIDI channel number:
vv = chorus send level:
RPN MSB/LSB (Controller number 100, 101)
Status 2nd byte
BnH 65H
BnH 64H
n = MIDI channel number:
mm = upper byte (MSB) of parameter number specified by RPN
ll = lower byte (LSB) of parameter number specified by RPN
Program Change
Status 2nd byte
CnH ppH
n = MIDI channel number:
pp = Program number:
* Transmitted according to the content of the SMF during playback of SMFs.
Channel Pressure
Status 2nd byte
DnH vvH
n = MIDI channel number:
vv = Channel Pressure:
* Transmitted according to the content of the SMF during playback of SMFs.
Pitch Bend Change
Status 2nd byte
EnH llH
n = MIDI channel number:
mm, ll = Pitch Bend value:
* Transmitted according to the content of the SMF during playback of SMFs.
Channel Mode Messages
* Transmitted according to the content of the SMF during playback of SMFs.
All Sound Off (Controller number 120)
Status 2nd byte
BnH 78H
n = MIDI channel number:
3rd byte
vvH
0H - FH (ch.1 - ch.16 )
00H - 7FH (0 - 127 )
3rd byte
vvH
0H - FH (ch.1 - ch.16 )
00H - 7FH (0 - 127 )
3rd byte
kkH
0H - FH (ch.1 - ch.16 )
00H - 7FH (0 - 127 )
3rd byte
vvH
0H - FH (ch.1 - ch.16 )
00H - 7FH (0 - 127 )
3rd byte
vvH
0H - FH (ch.1 - ch.16 )
00H - 7FH (0 - 127 )
3rd byte
mmH
llH
0H - FH (ch.1 - ch.16 )
0H - FH (ch.1 - ch.16 )
00H - 7FH (prog.1 - prog.128 )
0H - FH (ch.1 - ch.16 )
00H - 7FH (0 - 127 )
3rd byte
mmH
0H - FH (ch.1 - ch.16 )
00 00H - 40 00H - 7F 7FH (- 8192 - 0 - +8191)
3rd byte
00H
0H - FH (ch.1 - ch.16)
Reset All Controllers (Controller number 121)
Status 2nd byte
BnH 79H
n = MIDI channel number:
All Notes Off (Controller number 123)
Status 2nd byte
BnH 7BH
n = MIDI channel number:
Omni Off (Controller number 124)
Status 2nd byte
BnH 7CH
n = MIDI channel number:
Omni On (Controller number 125)
Status 2nd byte
BnH 7DH
n = MIDI channel number:
Mono (Controller number 126)
Status 2nd byte
BnH 7EH
n = MIDI channel number:
mm = mono number:
Poly (Controller number 127)
Status 2nd byte
BnH 7FH
n = MIDI channel number:
System Common Messages
Quarter Frame Messages
Status Second
F1H mmH (= 0nnndddd)
nnn = Message type :
dddd = 4 bit nibble data:
* If the Sync parameter "Gen." is set to "MTC," quarter frame messages of the time code
type specified by "MTC Type" will be transmitted when the BR-1600CD is running
(recording or playing). The transmitted time counts are summed to "SMPTE (MTC)
Offset Time" as the song top is "00:00:00:00".
Bit Field is assigned as follws.
Frame Count xxxyyyyy
xxx Reserved (000)
yyyyy Frame No. (0-29)
Seconds Count xxyyyyyy
xx Reserved (00)
yyyyyy Seconds (0-59)
Minutes Count xxyyyyyy
xx Reserved (00)
yyyyyy Minutes (0-59)
Hours Count xyyzzzzz
x Reserved (0)
yy Time Code Type
MIDI Implementado
3rd byte
00H
0H - FH (ch.1 - ch.16)
3rd byte
00H
0H - FH (ch.1 - ch.16)
3rd byte
00H
0H - FH (ch.1 - ch.16)
3rd byte
00H
0H - FH (ch.1 - ch.16)
3rd byte
mmH
0H - FH (ch.1 - ch.16)
00H - 10H (0 - 16 )
3rd byte
00H
0H - FH (ch.1 - 16)
0 = Frame count LS nibble
1 = Frame count MS nibble
2 = Seconds count LS nibble
3 = Seconds count MS nibble
4 = Minutes count LS nibble
5 = Minutes count MS nibble
6 = Hours count LS nibble
7 = Hours count MS nibble
0H - FH (0 - 15)
289