Dräger UCF FireCore Instrucciones De Uso página 17

1 Safety-related information
Dräger UCF FireCore
– Before using this product, carefully read these instructions for use and those
of the associated products.
– Strictly follow the instructions for use. The user must fully understand and
strictly observe the instructions. Use the product only for the purposes
specified in the intended use section of this document.
– Do not dispose of the instructions for use. Ensure that they are stored and
used appropriately by the product user.
– Only trained and competent users are permitted to use this product.
– Comply with all local and national rules and regulations associated with this
product.
– Only trained and qualified personnel are permitted to inspect, repair and
service the product as detailed in these instructions for use (see
"Maintenance", page 25). Further maintenance work that is not detailed in
these instructions for use must only be carried out by Dräger or personnel
qualified by Dräger. Dräger recommend a Dräger service contract for all
maintenance activities.
– Use only genuine Dräger spare parts and accessories. Otherwise, the
proper functioning of the product may be impaired.
– Do not use a faulty or incomplete product. Do not modify the product.
– Notify Dräger in the event of any component fault or failure.
– Never look directly into the sun with the thermal imaging camera.
– Do not charge the thermal imaging camera in explosion-hazard areas.
2 Conventions in this document
2.1 Trademarks
The following website lists the countries in which the Dräger trademarks are
registered: www.draeger.com/trademarks.
The trademarks cited are only registered in certain countries and not necessarily
in the country in which this document is published.
Dräger UCF FireCore
Safety-related information
|
en
17