Dräger UCF FireCore Instrucciones De Uso página 18

en |
Description
3 Description
3.1 Product overview
See Figure A on the fold-out page
1 Pairing symbol
2 Buttons for unlocking and panning
3 LED 3 (status of pairing with another device)
4 LED 2 (charge status of rechargeable battery)
5 LED 1 (system status)
6 On/Off button
7 Charging pins
8 USB port
9 Plug-in connector for Smart Adapter
10 Mode button
11 Window of the IR camera
3.2 Feature description
The thermal imaging camera provides thermal images in conjunction with the
Dräger FPS IMD In-Mask Display. With appropriate configuration, the thermal
images can be recorded continuously as video. Individual thermal images can
be recorded with the mode button. The thermal imaging camera switches off
automatically when the maximum permissible internal temperature is reached.
The thermal imaging camera has a USB port. The thermal imaging camera can
be connected to a PC via a USB cable so that the images and videos can be
transferred to the PC.
Dräger PC Link software can be used to configure the thermal imaging camera.
Using an adapter, the thermal imaging camera can be mounted on various fire
helmets.
There is a rechargeable battery in the thermal imaging camera. This battery can
be charged in the associated charging cradle. In stationary operation, the
charging cradle can be connected to the mains via the supplied plug-in power
supply unit. When the charging cradle is installed in a vehicle, the vehicle
adapter is used.
18
Dräger UCF FireCore