Publicidad
Idiomas disponibles
Idiomas disponibles
4
Wait until the indicator light (2) stops flashing and
remains lit permanently. Two beeps will be heard.
5
Hold the iron in a horizontal position over an empty
sink to collect the water.
If your appliance is equipped with a "Calc'nClean"
container (18*), place the iron on it.
Warning: the container must only be used to
perform the descaling process. It must not be
used as a stand for the iron while ironing.
6
Press the steam release button (15) for 2 seconds. The
descaling process will start automatically. Warning:
boiling water and steam will be released through
the soleplate, carrying limescale and/or deposits
that may be inside. During the process, a beep will
be heard every 5 seconds.
7
After approximately 3 minutes, the iron will stop
releasing steam. A long beep will be heard, indicating
that descaling process has finished. The appliance will
switch off automatically.
8
To clean the soleplate (17), immediately rub off any
residue by running the hot iron over a wet cotton cloth.
2. Cleaning the appliance
Regularly clean your appliance for properly maintenance.
Attention! Burn risk!
1
If the appliance is only slightly soiled, wipe it with a
damp cotton cloth only, and then dry it.
2
If the cloth is synthetic, it may melt due to the high
temperature on the soleplate. Switch the steam off and
rub off any residue immediately with a thickly folded,
damp cotton cloth.
3
To keep the soleplate smooth, you should avoid
contact with hard metal objects. Never use a scouring
pad, or chemicals to clean the soleplate.
* Model dependent
2x
5"
2"
BOS CH
23
Publicidad
