Aqara T1 Manual De Instrucciones página 4

Product Installation
1. Select a suitable plug, insert the plug into the
power adapter, and turn it clockwise 45°.
3. Clean the surface where the light strip will be installed, keep the installation surface flat, smooth
and dry, tear off the 3M protective paper on the back of the light strip, stick the light strip on the
installation surface, and press the light strip repeatedly with your hands to ensure that the light
strip is firmly pasted .
4. Connect the controller and the power adapter, and finally turn on the power.
2. Connect the light strip and the controller
according to the arrow.
02