Tecfrigo SNELLE 700 Q-R-G Instalación Y Uso página 6

Operator's guide:
1. Unpacking instructions
2. The handle
3. Round glass shelves
I
4. Square glass shelves
5. Grid shelves
UK
6. Cleaning of the internal glass panels
7. Connection to mains
D
8. Controls
9. Checking the correct functioning
E
10. Internal cleaning
F
!
WARNINGS
It is most important that this instruction booklet is kept together with the appliance both for future
NL
reference and for reasons of safety. 1
to use the controls or play with it.
P
characteristics of this appliance. . The electrical installation of the appliance should be carried out by a
qualified electrician or other competent person. . Never attempt to carry out repairs unassisted. Inexpert
S
repairs can cause serious damage and malfunction. . Assistance has to be provided by an authorized
engineer only. Always use original spare parts. . This appliance is not suitable for the storage of basic
DK
commodities not including food-stuffs. . The manufacturers of this appliance accept no responsibility for
the consequences of misuse in contravention of these safety instructions. It further reserves the right to
FIN
carry out improvements without prior notice.
9 . Never install the appliance near sources of heat (such as radiators, stoves, etc) and drafts (such as
windows, doors, ventilation systems, air conditioning, etc ...).
B
obstruction for at least 30 cm.
hang over the edges.
GR
evaporator, we recommend stopping the compressor and placing the goods in special refrigerated
containers, kept at the same temperature, until defrosting is completed;if this is not carried out the
CZ
compressor will continue to operate leading to a wasteful consumption of electricity and poor
performance.
EE
least 10 cm. Avoiding this, you will avoid also the consequent mildew formation and unpleasant smells
LV
!
Our products are for internal use only do not install outside restaurants, shops
LT
H
1. UNPACKING INSTRUCTIONS
CARDBOARD PACKAGING 1a
M
upwards. WOODEN CRATE
fork-lift truck between the appliance and pallet or crate. . Lift the appliance.
PL
crate. . Place the appliance on horizontal level surface, adjusting it using the suitable feet. 5
6. Pay attention anything is left inside the packing.
SK
type, for easier disponsal
SLO
2. THE HANDLE
1 . The handle will be found into a package inside the appliance. . Fix the base part of the handle using
the two screws inserted in the holes already. Tighten them with care. . Place the plastic part and press
down until it clicks into place
3. ROUND GLASS SHELVES
1 . The shelves, to be found into a carton box, should be slid into the supports placed in the vertical
rotating frame (first introduce the mirror shelf, in the lower position).
using the screws contained into the pack inside the appliance.Tighten with care (see picture 3).
4. SQUARE GLASS SHELVES
1 . The supports and the suction cups (n.4 for each shelf) are into a pack, inside the appliance. . Insert
the suction cup heads into the supports holes, pushing downwards
hook on the vertical frames slits
carton box, should be put on their supports. . First place the mirror shelf, in the lower position.
the other shelves on the wet suction cups
5. GRID SHELVES
1 .The supports are in a pack inside the appliance. . Fix the supports, inserting the hook on the vertical
frames slits ( ), pushing them downwards ( ).
on the supports, their raised edge opposite to the door (see picture 5).
g
model
2 . It is forbidden to modify in any way the main functions and
3
7
11 . Ensure that the products displayed on the shelves and grills do not
12 . If damp air or products to be refrigerated should cause ice to form on the
13 . If the appliance is not working and unused, it is indispensable to keep the door open at
. Cut surrounding tape. Remove the cardboard packaging by sliding
1b . Remove the nails from the wooden crate with care.
(see picture 1).
(See picture 2).
R
model
Q
model
(B), pushing them downwards
G
model
B
Operator's guide
11. Replacement of internalight
12. Replacement of the door magnetic gasket
Maintenance manual (Page 48):
1. Cleaning the condenser
2. Cleaning the evaporator
3. Replacement of a glass panel
4. Wiring diagram diagram of refrigeration unit
. Adults should operate this appliance only. Do not allow children
4
5
6
8 . Avoid installing the cabinet directly in line with sunlight.
10
. Keep the ventilation grills free from
3
7. Separate the packing materials according to their
2
(C). 4.
5
(See picture 4).
2
C 3 . The grid shelves are into a carton box. Place the grid
6
2 . Insert forks of
4. Remove the pallet or
3
2 . The shelves have to be fastened
(A). 3 . Fix the supports, inserting the
The shelves, to be found into a
2
6. Press